background image

15

Main Menu

The Main Menu contains the unit settings that should not require frequent change. The Main Menu 

is divided into eight tabs: Graph, Tools, Temp, Alarms, System, Units, Sonar and Time. Each tab will be 
described in more detail in this section. 

To enter the Main Menu, press the 

MENU

 button on the face of the unit twice. The first time you enter 

the Main Menu, the ‘Graph’ tab will be highlighted in black. Pressing the UP or DOWN on the 

ARROW

KEYPAD

 will move the highlight between the tab selections. Press the RIGHT 

ARROW KEYPAD

 to access 

the selection fields. Each time the Main Menu is accessed, the unit will return to the last edited selection 
field. Press the LEFT 

ARROW KEYPAD

 to get back to the tabs.

To change a setting on a Main Menu tab:

1.  Using the 

ARROW KEYPAD

, highlight the desired fi eld and press 

ENTER

 and the available options will 

appear.

2.    Highlight the desired setting and press 

ENTER

.

3.  Press 

QUIT

 or 

MENU

 to return to the Sonar display or to cancel data entry.

Graph Tab

Allows you to determine the appearance of the scrolling graph display and contains the unit settings that 

should not require frequent change. 

The following settings are available:

•    Fish Symbols —

 allows you to determine how the graph will display underwater targets and back-

ground information. If Fish Symbols are set to ‘Off’, the unit will display all of the available informa-
tion about the underwater environment. If a fi sh symbol is selected, the graph will display only the 
information related to that symbol. Actual fi sh returns may not always appear as perfect arches (like 
in simulator mode), due to the speed, fi sh orientation and/or other conditions.

•     Scale —

 controls the depth ‘Scale’ displayed vertically along the right side of the graph. The  depth

‘Scale’ can be confi gured to display four different ways: as an ‘Overlay’, in the ‘Corners’, with ‘Basic’ 
or ‘No Scale’.

Main Menu - Graph Tab

Fish Symbols Off— All available information will be 
displayed.

Suspended targets will display as fi sh symbols. 
Background information will be displayed.

Same as above with the target depth attached.

Suspended targets display as fi sh symbols. No back-
ground information will be displayed.

Same as above with target depth attached. 

Unit Operation

Main Menu Options

320C Manual.indd   15

3/11/2003, 11:37:21 AM

Summary of Contents for Fishfinder 320C







































Reviews: