background image

16 

Fishfinder 160C Owner’s Manual

O

PERATING

 I

NSTRUCTIONS

 > 

T

HE

 S

ETUP

 M

ENU

Shallow

The

 Shallow

 Alarm sounds a warning at a 

determined depth between 

1

 and 

900

 ft. 

Deep

The

 Deep

 Alarm sounds a warning at a determined 

depth between 

1

 and 

900

 ft. 

Fish Alarm

Sounds an alarm when the unit detects what it 

determines to be a fish. The alarm selections are: 

Off 

(default) or 

On

.

Graph

Fish ID

The Fish ID setting determines how the graph shows underwater 

targets and background information. If 

Fish ID

 is set to 

Off

, the 

unit shows all of the available information about the underwater 

environment. If a fish symbol is selected, the graph shows only the 

information related to that symbol (large, medium, and small sizes). 

In wide beam, targets detected toward the outside of the beam are 

indicated by a hollow fish symbol. Targets detected directly under 

the boat are indicated by a solid fish symbol.

(default)

 

the Fishfinder does not interpret the sonar 

return data. Fish appear as arches
Suspended targets appear as symbols. No background 

information appears
Same as previous with the target depth shown.
Suspended targets appear as symbols. Background 

information appears, making the distinction between fish 

and structure easier.
Same as previous with target depth shown.

Summary of Contents for Fishfinder 160C



































Reviews: