background image

Fishfinder 160C Owner’s Manual 

15

O

PERATING

 I

NSTRUCTIONS

 > 

T

HE

 S

ETUP

 M

ENU

Zoom

Selects a screen zoom scale. Available settings are: 

OFF

 

(default), 

2X,

 and 

4X

 zoom.

View

View

 is only available when a Zoom scale other than 

Off

 is selected. This setting allows you to select a 

specific zoom area to view on the screen, or allows 

the unit to automatically select a zoomed viewing area 

based on the bottom. When adjusting this setting, the 

top and bottom numbers reflect the zoomed view depth 

range.

The Setup Menu

The Setup menu contains the settings that should not need to be 

changed frequently. 

To display the Setup menu:

1.  Press the 

MENU

 key. 

2.  Using the 

up

 or 

down Arrow

 key, select 

Setup

, and press 

the 

ENTER

 key.

To change a Setup menu item:

1.  Using the 

up

 or 

down Arrow

 key, highlight the selection.

2.  Press the 

ENTER

 key to activate the setting.

3.  Using the 

up

 or 

down Arrow

 key, make the change.

4.  Press the 

ENTER

 key to accept the change.

Alarms

Battery

Sounds an alarm when the battery has 

discharged to a user-determined voltage. The 

Battery Alarm can help determine when the 

battery is reaching a critical state of discharge.

Summary of Contents for Fishfinder 160C



































Reviews:

Related manuals for Fishfinder 160C