23
Unit Operation
Setup Menu: Numbers/Alarms Tabs
To change the Depth Number Setting:
1. Highlight the ‘Num’ tab on the Setup Menu.
2. Highlight the ‘Depth Number’ selection fi eld and press
ENTER
.
3. Choose ’Auto’ or ‘From Chart,’ then press
ENTER
to accept the
selection.
Alarm Tab
The ‘Alarm’ tab allows you to activate and configure the four alarms
available in the Fishfinder 100 Blue. To access the ‘Alarm’ tab, place the
highlight over it using the arrow keys. See page 37 for alarm icons and
messages.
Fish Alarm
The ‘Fish Alarm’ can be confi gured to sound by fi sh size. There are
four different alarm selections: ‘Off,’ ‘Small, Medium and Large,’ ‘Medium
and Large,’ or ‘Large.’ The ‘Fish Alarm’ will sound with or without the ‘Fish
Symbols’ activated on the Chart Tab of the Setup Menu.
To set a Fish Alarm:
1. Highlight the ‘Alarm’ tab on the Setup Menu.
2. Highlight the ‘Fish Alarm’ selection fi eld and press
ENTER
.
3. Choose the desired setting, then press
ENTER
to accept the selection.
Fish Alarm Selections
FF 100 Blue.indd
09/18/01, 2:59 PM
23
