Garmin Fenix 5, Owner'S Manual

Page: 21 / 42

3
Wait while the device locates satellites ( Acquiring Satellite
Signals , page 26 ).
Navigation
Saving Your Location
You can save your current location to navigate back to it later.
1
Hold LIGHT .
2
Select .
3 Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1 From the watch face, select > Navigate > Saved
Locations .
2
Select a saved location.
3
Select an option to edit the location.
Deleting All Saved Locations
You can delete all of your saved locations at once.
From the watch face, select > Navigate > Saved
Locations > Delete All .
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from your current location to a new location.
1
If necessary, select > Add > Project Wpt. to add the
project waypoint app to the apps list.
2
Select Yes to add the app to your list of favorites.
3 From the watch face, select > Project Wpt. .
4 Select UP or DOWN to set the heading.
5
Select .
6
Select DOWN to select a unit of measure.
7
Select UP to enter the distance.
8
Select to save.
The projected waypoint is saved with a default name.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course.
1
From the watch face, select > Navigate .
2
Select a category.
3
Respond to the on-screen prompts to choose a destination.
4
Select Go To .
Navigation information appears.
5
Select to begin navigation.
Creating and Following a Course on Your
Device
1
From the watch face, select > Navigate > Courses >
Create New .
2
Enter a name for the course, and select .
3
Select Add Location .
4
Select an option.
5
If necessary, repeat steps 3 and 4.
6
Select Done > Do Course .
Navigation information appears.
7
Select to begin navigation.
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the keys to access
the MOB function ( Customizing the Hot Keys , page 23 ).
From the watch face, select > Navigate > Last MOB .
Navigation information appears.
Navigating with Sight 'N Go
You can point the device at an object in the distance, such as a
water tower, lock in the direction, and then navigate to the
object.
1
From the watch face, select > Navigate > Sight 'N Go .
2
Point the top of the watch at an object, and select .
Navigation information appears.
3
Select to begin navigation.
Navigating to Your Starting Point
You can navigate back to the starting point of your activity in a
straight line or along the path you traveled. This feature is
available only for activities that use GPS.
1 During an activity, select > Back to Start .
2 Select an option:
• To navigate back to the starting point of your activity along
the path you traveled, select TracBack .
• To navigate back to the starting point of your activity in a
straight line, select Straight Line .
Your current location
À
, the track to follow
Á
, and your
destination
Â
appear on the map.
Stopping Navigation
1
During an activity, hold MENU .
2
Select Stop Navigation .
Map
represents your location on the map. Location names and
symbols appear on the map. When you are navigating to a
destination, your route is marked with a line on the map.
• Map navigation (
Panning and Zooming the Map , page 15 )
• Map settings ( Map Settings , page 22 )
Panning and Zooming the Map
1
While navigating, select UP or DOWN to view the map.
2
Hold MENU .
3
Select Pan/Zoom .
4
Select an option:
• To toggle between panning up and down, panning left and
right, or zooming, select .
• To pan or zoom the map, select UP and DOWN .
• To quit, select BACK .
Navigation 15