![background image](http://html1.mh-extra.com/html/garmin/descent-12/descent-12_owners-manual_4327651008.webp)
Installing the Transceiver on Your Tank Regulator
WARNING
Always use the pre-installed flow restrictor when using the transceiver directly attached to your regulator.
Always use the included air spool when connecting the transceiver to a high pressure hose extension (
the Transceiver on a High Pressure Hose Extension, page 5
). Using the transceiver without either the flow
restrictor or air spool could result in serious injury or death from an air pressurization failure.
Before you install the transceiver on your tank regulator, you should read the transceiver position tips and
choose the port position that provides the best line of sight to the watch (
Transceiver Position Tips, page 1
).
1 Detach the first-stage regulator from the scuba cylinder and second-stage regulator.
2 Remove the port plug from the high-pressure output port.
3 Confirm the flow restrictor is installed in the transceiver, and screw it into the high-pressure output port until
it is secure.
WARNING
Verify the installed transceiver does not physically interfere with any hoses or other tank assemblies.
NOTICE
To prevent damage to the transceiver and possible loss of function, do not overtighten. Do not grip the regulator
or the transceiver to move, carry, or adjust the tank.
4
Installation and Setup
Summary of Contents for DESCENT 12
