Dakota Series Owner’s Manual
Appendix
To turn Demo Mode on, touch
Setup
>
System
>
GPS
>
Demo Mode
.
Connecting Your Dakota
to a Computer
You can connect the Dakota to your
computer using the supplied USB
cable.
To connect your Dakota to your
computer:
1. Lift the weather cap on the bottom
of the Dakota.
2. Insert the smaller connector on
the USB cable into the USB mini-
B jack.
3. Connect the other end of the
cable to a USB port on your
computer.
Installing a microSD
™
Card
The Dakota microSD data card tray
is located beneath the AA batteries.
Purchase microSD cards from an
electronics supplier or purchase
preloaded MapSource
®
detailed map
data cards from your Garmin dealer.
Go to
for compatible
map products.
To install or remove a microSD
card:
1. Lift the latch on the back of the
Dakota (
battery cover and the batteries.
2. Lift the metal cover.
3. Push the card into the microSD
card tray and close the metal
cover.
190-01069-00_0A.indd 33
4/17/2009 1:19:11 PM