Garmin cGPSmapper Owner'S Manual Download Page 72

Page: 72 / 100

cGPSmapper Manual

Appendices

http://cgpsmapper.com/

72 of 100

Appendices

9.1

cGPSmapper compilation Errors and Warnings

The table below contains a list of the different errors and warnings that could occur at

compilation time. Codes starting with either "E" or "R" apply only to routable maps. Codes

starting with "W" are warnings. Although the compilation will stop after an error occurs, it

will not stop when a warning message occurs.

This section will be further documented in a future version of this manual.

V Code Warning / Error Text

Description / Workaround

W001 Could not open include file.

W002 No zip codes file defined.

W003 No highways file defined.

W004 Cannot determine type of

element, type cannot be

defined before RGNTYPE.

W005 Error reading data.

W006 Null exit facility name for

RGN10 element.

W007 Wrong coordinates.

E.g. incorrectly separated coordinates like

(2.2,3.2),,(2.2,2.3)

W008 Element spans more than 10

degrees!

W009 Invalid [WPT] section -

RGNTYPE is not defined.

W010 ELEVATION parameter is

depreciated.

W011 Invalid [PLT] section -

RGNTYPE is not defined.

W012 - no longer used

W013 TRESIZE smaller than 100.

W014 RGNLIMIT should not be

smaller than 500.

A small RGNLIMIT derives in the creation of a

bigger map, with no gain in speed.

W015 TRESIZE larger than 5000 -

TRESIZE is fixed (i.e. the

TRESIZE is automatically

changed to 5000).

When the TreSize value in [IMG ID] is too big - the

resulting map IMG file renders more and more

slowly on a GPS receiver. This value should never

be higher than 5000. If the value is larger than

5000, it is internally changed to 5000 and the

warning is shown.

Note that for a preview map, this warning won't be

shown. There is a new key in [IMG ID] to specify

that a preview map is created ('Preview=Y').

W016 - no longer used

W017 - no longer used

Summary of Contents for cGPSmapper





































































































Search results

Summary of Contents for cGPSmapper

Reviews:

Related manuals for cGPSmapper

Brands by name

Popular brands

Garmin cGPSmapper, Owner'S Manual

Search results

Summary of Contents for cGPSmapper

Reviews:

Related manuals for cGPSmapper

Brands by name

Popular brands