cGPSmapper Manual
MapSource
http://cgpsmapper.com/
64 of 100
2. Select the map(s)
The map(s) to be loaded in the GPS must be selected.
This is done via any of the following methods:
Under
Map
, in the
Tools
menu.
Via the respective button located in the
Tools Toolbar
.
Once this is done, the map to be selected must be clicked (in order to select it).
The maps to be transferred to the GPS (and the
bytes
they occupy) will be shown to the
left of the screen.
3. Send the map(s) to the GPS
This is done via any of the following methods:
Under
Send To Device
, in the
Transfers
menu.
Via the respective button located in the
Transfer Toolbar
.
Once the transfer is done, the program will confirm the map(s) transfer finished
successfully.
