Astro
Dog Tracking System Owner’s Manual
Appendix
4. Follow the instructions for using WebUpdater or click
Download
(located under
Unit Software
) and follow
the instructions. (If
Unit Software
is not listed on the
Web site, there are no updates.)
NotE:
To avoid data corruption, do not turn the
Astro 220 off or the DC 30 off during data transfer.
Updating DC 30 Software
The DC 30 uses your Astro 220 as a wireless transfer
device when transferring software updates and detailed
dog tracks.
1. Install Garmin MapSource Trip and Waypoint
Manager. Follow the instructions for installation and
operation provided with the software.
2. Connect the Astro 220 to a computer using the USB
cable provided. Turn the Astro 220 on.
3. Turn the DC 30 on and place it within 12 inches of the
Astro 220.
4. Go to
Updates & Downloads
.
5. Open the Dog Information page (
) on the
Astro 220.
6. Press
MENU
>
Upgrade Dog Unit
and follow
on-screen instructions.
7. Follow the instructions for using WebUpdater or click
Download
(located under
Unit Software
) and follow
the instructions. (If
Unit Software
is not listed on the
Web site, there are no updates.)
Transferring Tracks from the Astro 220 to
MapSource on Your Computer
To transfer tracks:
1. Open Garmin MapSource Trip and Waypoint
Manager. Select the Tracks tab on the left side of the
MapSource page.
2. Click
Receive from Device
from the Transfer menu.
Transferring More-Detailed Dog Tracks
from a DC 30 to MapSource
The dog tracks saved on your Astro 220 are detailed
enough for most users to view the movements of their
dog. The DC 30 does, however, store more-detailed tracks
