Astro Dog Tracking System Owner’s Manual
Appendix
output power:
DC 30: 2 watts
Optional Accessories
To obtain replacements for Astro 220 accessories and for
optional accessories, contact your Garmin dealer, Garmin
Product Support (
), or visit the Garmin Web site at
www.garmin.com/products/astro/
Transferring Data
Before connecting your Astro 220 to a computer, install
the USB drivers contained in the MapSource Trip
and Waypoint Manager software that came with your
Astro 220. Follow the instructions for installation and
operation provided with the software.
Information about USB Drivers
The USB drivers are installed when you install the
MapSource Trip and Waypoint Manager software. When
you initially connect the Astro 220 to a USB port, your
computer might prompt you to locate the destination of
the drivers for the device. After the drivers are installed
to your computer, your computer detects your Astro 220
each time you connect it to a USB port. Periodically
check
for updated drivers.
To connect your Astro 220 to your computer:
1. Insert the smaller connector on the USB cable into the
USB port on the back of your Astro 220.
2. Connect the other cable end to a USB port on your
computer.
Transferring Data to a microSD Card
Some Astro 220 navigation features require detailed
mapping data, and you may decide to purchase and
transfer detailed maps. A microSD card (not included)
can be loaded with detailed maps from optional
MapSource disks to enhance your Astro 220. With
detailed MapSource mapping data, you can view listings
of nearby restaurants, lodging, shopping centers, and
entertainment, and you can retrieve addresses and phone
numbers for any listed location. To achieve the best
terrain details when hunting, use Garmin U.S. Topo maps.
The amount of data transferable is limited to the capacity
