dog is completely dry before placing the
collar on the dog. Small amounts of harsh
chemicals can damage the plastic
components and collar laminate.
Before you can put the collar on the dog,
you must pair the handheld device and
collar (page 5) , and acquire satellite
signals (page 4).
1
Position the collar with the VHF whip
antenna pointing up, the GPS antenna
facing up, and the LEDs facing
forward.
2
Place the collar around the middle of
the dog's neck.
3
Tighten the strap so it is snug around
the dog's neck.
NOTE: The collar should fit tightly and
should not be able to rotate or slide on
the dog's neck. The dog must be able
to swallow food and water normally.
You should observe your dog's
behavior to verify the collar is not too
tight.
4
If the strap is too long, cut off the
excess, leaving at least 3 in. (7.62 cm)
to spare.
Calibrating the Compass
NOTE: You must calibrate the electronic
compass outdoors. Do not stand near
objects that influence magnetic fields,
such as cars, buildings, or overhead
power lines.
The device has a 3-axis electronic
compass. You should calibrate the
compass after moving long distances,
experiencing temperature changes, or
changing the batteries.
1
Select DOG > MENU.
2
Select Calibrate Compass > Start.
3
Follow the on-screen instructions.
6
Introduction
