3
Select the power key on the handheld
device.
shows the GPS signal strength.
When the collar has acquired satellite
signals, the status LED flashes a double-
blink or triple-blink in green.
Pairing a Dog Collar to the Astro
Device
Before you can pair devices to the
handheld device, the handheld device
must be close enough to the dog collar
device to touch it.
The handheld device can track up to 20
dogs with dog collar devices. If you
purchase additional dog collar devices,
you can link them to the handheld device.
1
Select DOG.
2
Select Add Dog.
3
Follow the on-screen instructions.
By default, the new dog is named
“Dog” and an ID number is randomly
assigned.
An error message could appear if
there is a conflict with the ID number of
another dog.
After pairing is compete, you can add the
dog collar device to additional handheld
devices using the dog collar device track
code or control code.
Adjusting the Backlight Brightness
NOTE: The backlight brightness may be
limited when the battery strength is low.
Extensive use of screen backlighting can
significantly reduce battery life.
1
Select .
2
Select to cycle through the
brightness levels.
3
Select ENTER.
Dog Tracking
The handheld device allows you to track
your dog, using the tracking compass or
map. The map displays your location and
your dog's location and tracks. The
compass pointer indicates the direction of
the dog's current location.
Fitting the Collar on Your Dog
CAUTION
Do not spray the device or collar with
harsh chemicals including but not limited
to flea or tick spray. Always ensure that
any flea or tick spray that is applied to the
Introduction
5
