Garmin aera 796, Pilot'S Manual

Page: 155 / 210

Garmin aera 795/796 Pilot’s Guide 190-01194-00 Rev. A
Appendix D
141
Overview
GPS Navigation
Flight Planning
Hazar
d A
voidance
Additional F
eatur
es
Appendices
Index
Attaching the yoke mount to the yoke shaft or control arm (see
following figure):
1)
Open the clamp by turning the Clamp Adjustment Knob until it can be
easily placed over the yoke shaft or control arm. Install the yoke mount as
far from the panel as is practical.
2) When in place, tighten the Clamp Adjustment Knob to secure the yoke
mount to the yoke shaft or control arm.
3) Loosen the Cradle Adjustment Knob, then orient the cradle as desired.
4)
Tighten the Cradle Adjustment Knob to hold the cradle in place.