Garmin Aera 760, Pilot'S Manual

Page: 212 / 264

Garmin aera 760 Pilot’s Guide 190-02674-00 Rev. B
Appendix D
196
Overview
Navigation
Flight Planning
Hazar
d A
voidance
Additional F
eatur
es
Appendices
Index
GENERAL INTERFACE SETUP
The Interface Setup controls the input/output format used when connecting the unit
to external devices.
Selecting an interface:
1) From the Main Menu , touch Tools > Setup > Interface .
2) Touch Serial Port 1 or Serial Port 2 .
3)
Touch
Serial Data Format
. A vertical list is displayed.
4)
Touch the desired data format ('
Garmin Data Transfer
', '
NMEA Out
',
'
Aviation In
', '
Aviation In/NMEA & VHF Out
', '
GTX TIS-A In
', '
GTX
TIS-A In/NMEA & VHF Out ', ' Garmin Data Transfer ', ' MapMX ', or
' None '.
Restoring interface defaults:
From the
Main Menu
, touch
Tools
>
Setup
>
Interface
>
Menu
>
Restore Default
.
S
erIal
D
ata
f
orMatS
• None : Provides no interfacing capabilities.
• NMEA Out : Transmits NMEA position, velocity, and navigation data.
• Aviation In
: The proprietary format used for connection to a Garmin panel-mounted
GPS receiver. This eliminates the need to enter the destination on both units. If the exter-
nal device supports both the Aviation In and MapMX formats, Garmin recommends using
the preferred MapMX format.
• Aviation In/NMEA & VHF Out
: Receives aviation data and transmits out both NMEA
data, at 9600 baud, and VHF frequency tuning information to a Garmin Nav/Comm radio.
• GTX TIS-A In
: Receives TIS-A data from a Garmin Mode S transponder or other compat-
ible device.
• GTX TIS-A In/NMEA & VHF Out : Receives TIS data and transmits out both NMEA data,
at 9600 baud, and VHF frequency tuning information to a Garmin Nav/Comm radio.
• Garmin Data Transfer
: The proprietary format used to exchange data with a PC,
weather/traffic device, or another Garmin aera 760.