background image

3

Route the power cable to your vehicle power outlet.
The included vehicle power cable is designed to be routed 

out of sight. It is long enough to route around the windshield 

in most vehicles, and you can hide the thin cable along or 

behind the trim or headliner.

4

Plug the other end of the vehicle power cable into a power 

outlet in your vehicle.

5

If necessary, turn on the vehicle ignition switch to provide 

power to the power outlet in your vehicle.
The device turns on.

6

Follow the on-screen instructions to complete the initial 

device setup.
The camera view appears.

7

Adjust the position of the camera to capture the desired field 

of view.

Setting the Camera Placement

You can mount the device in the left, center, or right of your 

windshield. For the best performance, you should set the 

Camera Placement option to indicate the location of your device 

in the vehicle.

1

Select 

Settings

 > 

Driver Assistance

 > 

Camera Placement

.

2

Select 

Horizontal Placement

, and select the horizontal 

placement of your camera.

3

Select 

Vehicle Height

.

4

Select an option:
• If you are driving a large vehicle, like a full size van or 

truck, select 

Tall

.

• If you are driving a car, select 

Normal

.

Turning On the Device Manually

NOTE: 

When the device is connected to an ignition-switched 

power outlet, it turns on automatically when you turn on the 

vehicle.

Select  .

The device turns on.

Turning Off the Device Manually

NOTE: 

When the device is connected to an ignition-switched 

power outlet, it turns off automatically when you turn off the 

vehicle.

Hold   for 3 seconds.
The device turns off.

Dash Cam Recording

NOTICE

Some jurisdictions regulate or prohibit use of this device. It is 

your responsibility to know and comply with applicable laws and 

rights to privacy in jurisdictions where you plan to use this 

device.
Before you can record video, you must install a camera memory 

card (

Installing the Memory Card

, page 1

).

By default, the device immediately starts recording video when it 

turns on. It continues recording, overwriting the oldest, non-

saved video until it turns off.

Saving a Video Recording

By default, the device uses a sensor to detect a possible 

incident and saves video footage automatically before, during, 

and after the detected event. You can also save video files 

manually at any time.

Hold  .
The device saves the video footage before, during, and after 

you select  ,

The memory card has limited storage. After you save a video 

recording, you should transfer the recording to your computer or 

other external storage location for permanent storage (

Videos 

and Photos on Your Computer

, page 3

).

Taking a Picture

You can take a picture with this device.

From the viewfinder, select  .
The device saves the picture to the memory card.

Event Detection

By default, the device uses a sensor to detect possible incidents 

and saves video footage automatically before, during, and after 

the detected event. The video footage is stamped with the time, 

date, and location of the event.

Viewing Videos and Pictures

NOTE: 

The device stops recording and alerts are disabled while 

viewing videos or pictures.

1

Select   > 

Gallery

.

2

Select an option:
• To view videos you saved, select 

Saved Videos

.

• To view parked videos you saved, select 

Parked Videos

.

• To view saved photos, select 

Pictures

.

• To view Travelapse

 video footage, select 

Travelapse

.

• To view recent video footage that has not been saved, 

select 

Unsaved Videos

.

3

Select a video or photo.

Connecting the Device to Your Computer

You can view videos and photos on your computer using a 

micro-USB cable.

1

Plug the small end of the micro-USB cable into the port on 

the device.

2

Plug the larger end of the micro-USB cable into a port on 

your computer.
Depending on your computer operating system, the device 

appears as either a removable drive or a removable volume.

Connecting the Device to Garmin

®

 VIRB

®

 App

You can save pictures and video recordings by connecting your 

smartphone or tablet to the free Garmin VIRB App. To download 

the Garmin VIRB app, or for more information, go to 

garmin.com

/VIRBapp

.

1

From the application store on your mobile device, install the 

Garmin VIRB app.

2

From the main menu on the Dash Cam, select 

Gallery

 > 

Share Gallery

.

2

Dash Cam Recording

Summary of Contents for AA3110













Reviews: