4
Place the rubber pad around the
product
:
• If the diameter is
25.4 mm, use the thicker pad.
• If the diameter is
31.8 mm, use the thinner pad.
5
Place the
c
onnector around
the rubber pad.
6
Replace and tighten the screw.
NOTE: Garmin
®
recommends a torque
specification of 7 lbf-in. (0.8 N-m). You
should check the tightness of the
screw periodically.
7
Align the tabs on the back of the
other
device with the mount notches
Ä
.
8
Press down slightly
until it locks into
place.
.
Keys
À
Select to adjust the backlight
brightness.
Hold to turn the device on and
off.
Á
Select to scroll through the data
screens, options, and settings.
From the home screen, select to
view the connections page.
Â
Select to scroll through the data
screens, options, and settings.
From the home screen, select to
view the device menu.
Ã
Select to mark a new lap.
4
Introduction
DRAFT
