2
Place the rubber disk
À
on the back of
the mount.
The rubber tabs align with the back of
the mount so it stays in place.
3
Place the mount on the
product
.
4
Attach the mount securely using
the two bands
Á
.
5
Align the tabs on the back of the
device with the mount notches
Â
.
6
Press down slightly
until it locks into
place.
.
Installing the O
ther
Mount
1
Select a secure location to mount the
other
device where it does not
interfere with the safe operation
.
2
Use the hex key to remove the screw
À
from the connector
Á
.
3
If necessary, remove the two screws
on the back side of the mount
Â
,
rotate the connector
Ã
, and replace
the screws to change the orientation of
the mount.
Introduction
3
DRAFT
