EN–
Instructions
EN
Manually Adjusting the Heading of
the GHP 10 Autopilot System With
the GHC 10 Remote Control
You can manually adjust the heading of the
autopilot system with the arrow buttons on the
GHC 10 Remote Control.
Single arrows
(
)—Manually adjusts the
heading using “Rudder” steering. This adjusts the
heading in increments of 1°.
Double arrows
(
)—Manually adjusts the
heading using “Step” steering. This adjusts the
heading by the “Step Turn Size” defined on the
GHC 10 unit.
Note:
For more information on “Rudder” and
“Step” steering, see the
GHP 10/GHC 10 Quick
Start Manual
.
Locking and Unlocking the GHC 10
Remote Control Buttons
Press and release the
LoCK
button (
) to
lock all the GHC 10 Remote Control buttons
except the
Mob
button. When locked, the remote
control will beep when you press any button on
the remote control other than
Mob
button.
Press and release the
LoCK
button to unlock the
remote control buttons.
Summary of Contents for 010-11146-00 - GPS Receiver Remote Control
Page 79: ......