manualshive.com logo in svg

Garmin 010-10307-00 - MapSource Fishing Hot Spots, User Manual, Page: 9 / 14

Share
Download
Garmin 010-10307-00 - MapSource Fishing Hot Spots User Manual Download Page 9

2

Installation

 Installing the Device Drivers

7. When installation is complete a window will display that shows 

the device name (Garmin USB Data Card Programmer) and states 
the driver installation is fi nished. Click on “Finish”. 

8. A fi nal window will appear telling you that operating software for 

the Card Programmer is being installed. 

9. To make sure the USB Programmer has been successfully installed: 

From the Control Panel, click on “System”, then the “Device 
Manager” tab, then click the +  by “Universal serial bus control-
ler”. You should see “Garmin USB Data Card Programmer” on the 
list. Another method would be to open the MapSource program, 
click the ‘Save To Device’ icon, then the ‘USB Port’ tab. You should 
see “Card Programmer” listed in the “Save Maps To:” window.

If you see a yellow ‘!’ mark in front of the device name, (install) 

appears at the end of the Programmer name or the Programmer 
appears under “Other Devices” as an unknown device, follow these 
alternate steps to install the Programmer:

1. Double-click the My Computer icon from your Desktop. For Win-

dows 98, click  “View”, “Folder Options”, then the “View” tab. 
For Windows 2000/ME, click “Tools”, “Folder Options”, then the 
“View” tab.

2. Make note of the following changes if you wish to change your 

View settings back after installing the Programmer. Change the 
Hidden Files selection to “Show All Files” or “Show hidden fi les 
and folders” and uncheck the “Hide fi le extensions for known 
fi le types” or “Hide protected operating system fi les”, then click 
“OK”.

3. Be sure the driver CD is inserted and the USB Programmer is 

plugged into the PC. Open the Control Panel. For Windows 98, 
click on “System”, then the “Device Manager” tab. For Windows 
2000/ME, click the “Hardware” tab, then click “Device Manager”. 

The required driver fi les which the USB Data Card 
Programmer needs to fi nd on either the USB Data 
Card Programmer CD, the City Navigator CD, or the 
MapSource Setup CD are:

grmn0200.inf

grmn0200.sys
grmn1200.sys

If these fi les cannot be seen in the root directory on the 
CD using Windows Explorer, your View settings may 
need to be adjusted.

,

USB DCP Manual.indd   2

12/18/2002, 4:14:38 PM

Summary of Contents for 010-10307-00 - MapSource Fishing Hot Spots















Reviews:

No comments