4
If you are running an early version of MapSource (prior to 3.04),
you may upgrade your version of MapSource at this time using the
driver CD provided with the USB Data Card Programmer.
If you already have a version of MapSource newer than 3.05
(City Navigator, or the MapSource Setup CD), upgrading from the
driver CD is not necessary. You may also visit the Garmin web site to
download the most recent upgrade for MapSource.
To Install the MapSource Software Upgrade including
USB Data Card Programmer Support:
1. Insert the USB Data Card Programmer CD-ROM into your comput-
er’s CD-ROM drive.
2. Click the Start button and select “Run...”
3. Then type in the drive letter of your CD-ROM drive followed by
the MapSource Update fi le name: MSUPDATE.EXE. (For example
d:\msupdate.exe)
4. Press ENTER and follow on-screen instructions.
5. Open MapSource and check the “About” box in the help fi le
to determine that you have successfully installed Version 3.04
or later.
Installing the MapSource
Software Upgrade
Installation
USB DCP Manual.indd 4
12/18/2002, 4:14:39 PM
