PAGE 16: This covers fitting the bars to the table and the handles to the bars.
NOTE: Make sure you put bars in the right places. We recommend that you put all the bars in place before you start fixing them to ensure you have it right. Do not
forget to fit the black nylon bushes where the handle end passes through the table. The last step is to push the plastic handles onto the bars.
TIP: If it is cold the handles may be difficult to push fully onto the bars. In this case try warming them for a few minutes first (for example on a radiator or in hand
hot water) taking care not to melt them or burn or scald yourself or anyone else. Use a mallet to tap them onto the bars taking care not to hit the side of the table. If
you do not have a mallet you can use a hammer with a rag in between to avoid damage to the handle.
