a.
Slide the Foam roll tube
(17)
into the hole on the Base frame
(1)
. Push 2 x Ø17mm Foam rolls
(69)
onto each side of the Foam roll tube
(17)
.
b.
Attach the Leg developer
(15)
to the Base frame
(1)
using M10 x 60mm Allen bolts
(29)
and 2 x
Ø10mm Washers
(41)
, M10 Aircraft nut
(42)
and M10 Nut cap
(64)
.
c.
Slide the Foam roll tube
(17)
into the hole on the Leg developer
(15)
. Push 2 x Ø17mm Foam rolls
(69)
onto each side of the Foam roll tube
(17)
.
Note:
(53/55)
were fixed in the factory.
Step 10
Assembly instructions
18
Pre-fitted
Pre-fitted
