![background image](http://html1.mh-extra.com/html/garland/shaker-400-fw/shaker-400-fw_instruction-manual_3633549021.webp)
English
English
21/96
2.3. SECURITY IN THE WORKPLACE
Do not handle the machine in areas that
may have inflamable liquids, gases or dust.
Electrical machines create sparks that could cause
any of these to ignite.
The area included in a 15m radius around
the machine must be considered risk zone
and nobody should be there while the machine is
working and, when necessary, a cord and warning
signals must be used around the working area.
Mantain a minimun clearance of 10m from
current-carrying lines. Life-threatening
danger form electric shock.
Maintain children and passers-by well clear when
working with the machine. Distractions can cause a
lack of control.
When work is to be performed simultaneously by two
or more persons, always check for the presence and
location of others so as maintain a distance between
each person sufficient to ensure safety.
2.4. ELECTRIC SECURITY
This machine is designed to connect to a 12 V battery
with more than 20 Ah.
The use of other batteries could break the machine,
could make the battery explode and increases the risk
of fire.
Never cut the cable. There is a risk of electric shock
and also of damaging the machine.
The electric plug of this machine must coincide with
the electric mains. Do not modify in any way the
electric plug. Electric plugs not modified and that
coincide with the electric mains would reduce the risk
of electric shock.
Avoid body contact with earthed surfaces such as
tubes, radiators, electric kitchens and refrigerators.
There is an increased risk of electric shock if in
contact with earthed products.
Do not expose this machine to rain or humid
conditions. The water that could enter the machine
could increase the risk of electric shock.
Do not touch the mains or the cables with wet hands.
Do not overstretch the cable. Do not use the cable
to transport the machine, to lift the machine or to
remove from the electric mains. Maintain the cable far
away from heat sources, oil, sharp edges or pieces
in movement. Damaged cables or twisted cables
increase the risk of electric shock.
Never use the machine with a damaged cable or with
the electric mains damaged. Before connecting the
machine, check the plug and the cables for damages.
If you discover any damages take your machine
to your nearest after sales service for repair. If the
cable is damaged or broken, disconnect the machine
immediately. Damaged cables or twisted cables
increase the risk of electric shock.
The substitution of the plug or cable should be done
by an approved and homologated after sales service.
Do not use the machine if the switch does not change
from closed to open. Any electric machine that cannot
be controlled by the switch is dangerous and must be
repaired.
Always disconnect the machine from the electric
mains before carrying out any maintenance work on
this machine. Only manipulate the machine when
disconnected from the mains.
Summary of Contents for SHAKER 400 FW
