Garland RegenTAP Dual Breakout INT10G12 B5 Series User Manual Download

Page: 3 / 3

User Guide

RegenTAP: Dual Breakout | INT10G12XXB5-X | 4.22.1

Installation Procedure

1. Insert the SFP into the INT10G12XXB5-X based on the speed and application per the Media Types

table. Verify the correct SFP is inserted into port 3.

2. Connect power cables to PS1 and PS2 on the rear panel and plug into available power sources.

3. Verify that the PS1 LED and PS2 LED on the front panel are illuminated.

4. Verify that the SYS LED on the front panel is illuminated.

5. Connect the network ports of tap 1 to the desired sources.

6. Verify the link LEDs are illuminated indicating link.

7. Verify the activity LEDs are flashing indicating traffic.

8. Connect the monitor ports to the desired source.

9. Verify the link LEDs are illuminated indicating link.

10. Verify the activity LEDs are flashing indicating traffic.

Summary of Contents for RegenTAP Dual Breakout INT10G12 B5 Series

Page 1: ...anel LED Indications PS2 Power Supply 2 LED PS1 Power Supply 1 LED SYS System LED Port 1 L A1 Link Activity LED Port 2 L A2 Link Activity LED BP N A Up Arrows SFP Ports 3 11 Link Activity LEDs Down Ar...

Page 2: ...or advertised speed of the device connected to a particular port 1G copper and 1G fiber SFPs cannot be used together Port 3 is a monitor port Port 3 also has a second functionality of determining the...

Page 3: ...D on the front panel are illuminated 4 Verify that the SYS LED on the front panel is illuminated 5 Connect the network ports of tap 1 to the desired sources 6 Verify the link LEDs are illuminated indi...