Part # 1844066 Rev 01 (02/13/2008)
Page 9
OPERATING INSTRUCTIONS Continued
Programming Menu Presets
1. Press the Select Key until “Air” appears on the display.
Notice the LED is illuminated and will remain
illuminated until the set mode is exited. You will exit set
mode automatically when no key has been pressed for 5
seconds.
°F
°C
2 Press the Select Key momentarily and scroll through the
“Hu” display until the display reads “PIA”.
°F
°C
3. Press the or key to increase or decrease the
displayed air temperature. The factory default is 150°F or
66°C.
°F
°C
4. Press the Select Key again to program the humidity.
°F
°C
5. Press the or key to increase or decrease the
displayed humidity setting. To activate the humidity the
setting must be greater than 10, to operate in dry mode
set the display to 10. The factory default is 50. Continue
the same procedure to program menu presets P2, P3 and
P4. Note that in user mode P1-P4 does not appear unless
a value has been programmed.
Summary of Contents for PHD PLUS
Page 12: ......