Aggregator
PacketMAX™ Advanced Aggregator | GAA10G10AC | 1.19.2
3.3 Config Map
Config maps are unidirectional connections between ingress port(s) to egress port(s) and/or a load
balancing group.
1. Select Create Config Map on the Packet Broker Configurations panel.
The Create Config Map panel will be displayed. Any previously created load balancing groups
or filter templates will be displayed along with the new options. Any port shaded gray can be
used for a config map, any port shaded black may not be used.
2. Select the Name pencil icon to apply a name, optional. If no name is entered the system will
automatically apply a name to the config maps as follows, map, map(1), map(2) etc.
3. Place the cursor in the Name panel and enter the name.
4. Select the Check to apply.
5. Select the Description pencil to apply a description, optional.
6. Place the cursor in the Description panel and enter the description, optional.
7. Select the Check to apply updates.
3.3.1 Ingress
1. Add an ingress port by placing the cursor on the desired port. Select with the left mouse button. Drag
the port to the Ingress panel and release. Ports may be added in any combination. If multiple ports are
added, then the traffic from all ingress ports will be aggregated.
Figure 1 Ingress
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
17
