Aggregator
PacketMAX™ Advanced Aggregator | GAA10G10AC | 1.19.2
2.6 Syslog
The following configuration options may be displayed, modified, enabled or disabled.
Unit ID
Syslog Server IP Address
Protocol
Protocol Port Number
1. Select Syslog.
The Syslog Configuration panel will be displayed with the current configuration.
2. Select Edit Settings.
3. Enable Syslog Config.
4. Enable, disable or modify the desired options.
5. Select Save to save updates.
6. Select Cancel to return the Syslog Configuration panel.
7. Sys Log Test may be selected to send a test message to the server.
2.7 SNMP
The following configuration options may be displayed, modified, enabled or disabled.
V2 Read/Write
V2 read Only
V3 MD5/DES
V3 SHA/AES
Access Port
Access Port
Access Port
Access Port
Trap Port
Trap Port
Trap Port
Trap Port
Trap IP AddressTrap IP AddressTrap IP AddressTrap IP Address
Community Password Community Password User
User
Auth Password
Auth Password
Priv Password
Priv Password
1. Select SNMP.
The SNMP Configuration panel will be displayed with the current configuration.
2. Select Edit Configuration.
The SNMP Configuration panel will be displayed.
3. Select Enable SNMP Config.
4. Enable, disable or modify the desired options.
5. Select Save to save updates.
6. Select Cancel to return the Syslog Configuration panel.
7. SNMP Test may be selected to send a test trap to the server.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
11
