manualshive.com logo in svg

Garland P10GSFPBPFE, User Manual

Share
Download
Garland P10GSFPBPFE User Manual Download Page 63

User Guide

XtraTAP™ Portable Packet Broker | P10GSFPBPFE | 4.22.1

2. Filter templates may be modified by selecting the green filter icon for the desired template.

The Edit Filter panel will be displayed. Any option modification made will not change the original

template. It is advisable to rename a filter if the original filter template options were modified.

3. Enter the filter name, optional. If no name is entered the system will automatically apply a name to the

filter as follows, iFlt, iFlt(2), iFlt(3) etc.

4. Select Accept once all desired options have been modified.

5. Remove a Filter Template by selecting the red X.

 Egress

1. Add an egress port by placing the cursor on the desired port. Select with the left mouse

button. Drag the port to the Egress panel and release.

Figure 36 Egress Port

2. Remove a port by selecting the Red X.

 Config Map Save

1. Select Save to save the current configuration.

The “Save this configuration? (May take a few seconds.)” panel will be displayed.

2. Select OK to save the Config Map.

3. Select Cancel to disregard.

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

63

Summary of Contents for P10GSFPBPFE






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands