manualshive.com logo in svg

Garland P10GSFPBPFE, User Manual

Share
Download
Garland P10GSFPBPFE User Manual Download Page 43

User Guide

XtraTAP™ Portable Packet Broker | P10GSFPBPFE | 4.22.1

5. Select Save to save updates.

 

 

 

 

 

 

 

 Enable/Disable Config Map

Config maps may be enabled or disabled as desired. If a config map is enabled, it is in the database and

available for traffic. If a config map is disabled, it is in the database and not available for traffic. If the
config map has a green check, then it is enabled. If the config map has a red dash, then it is disabled.

 Disable Config Map

1. Select the green check for the config map in the Enable column.

The green check will change to a red dash.

2. Select Save.

 Enable Config Map

1. Select the red dash for the config map in the Enable column.

The red dash will change to a green check.

2. Select Save.

The red dash will change to a green check.

3. Select Save.

 8. Aggregate Mode

In this mode, the network ports 1 and 2 and aggregate ports 3 and 4 are defined by the system. LFP

is supported on the network ports in this mode. The traffic ingressed port 1 is egressed out ports 3 and 4.
The traffic ingressed in port 2 is egressed out ports 3 and 4.

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

43

Summary of Contents for P10GSFPBPFE






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands