Garland NIPON 1020 K, Instruction Manual

Page: 32 / 144

English
32/144
English
33/144
Warning labels indicate required information for the
use of the machine.
4. MACHINE SYMBOLS
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
3. WARNING SYMBOLS
Sense of rotation.
Maximum tool rotation
speed.
XXXX min -1 . XXXX min -1 .
Attention!: The fuel used is highly
inflammable.
Attention!:Do not refill the machine in a
closed area.
Air positions:
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Positions start switch located on the right
handle of the machine.
“O” = Off (The machine don´t work)
“I”= On (The machine is ready to work)
Accelerator fixing position.
STOP -
0
I
START
Fuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Air clutch.
START
Warning and care.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Attention!, Danger!: The cutting tool can
project hard objects.
Caution! Hot Surface.
Do not smoke or bring a flame to the
combustible or the machine.
Caution! Maximun speed of gear
XXXX min -1 .
Do not let people enter in
the work area. This area
will be of a diameter of
15 meters from the point
in which you are working.
15 m (50 ft)