18
Standby Button - (Black):
When both "STANDBY" and "CANCEL/RAISE"
buttons are pressed simultaneously, the upper platen
will lower to the griddle surface. Press the “STANDBY”
button again within five (5) seconds from the start of
the cook cycle, to place the controller in its “standby”
state. The display will flash "STANDBY" along with the
menu item currently selected. For energy conservation
and periods of non-use this will maintain grill
temperatures.
Cancel/Raise Platen Button - (Green):
From the "STANDBY" mode, pushing this button will
cancel “Standby” and raise platen. During the cooking
cycle, pressing this button will cancel the cooking timer
and return the grill to the "IDLE" mode.
NOTE: If the platen is in motion, pressing the
“CANCEL/RAISE” button will stop the platen in
motion and return the platen to the “IDLE”
mode (E-prom version 3.52 and greater).
HOW TO - NORMAL OPERATING MODES
NOTE: TO STOP THE GRILL AT ANY TIME, TURN THE MASTER POWER SWITCH TO STOP
To Cook in Clam Grill Mode:
1. SELECT a clam grill menu by pressing the "MENU
SELECT" button, until you attain the required Clam
menu item. The display may read either "TOO
COOL" or "TOO HOT," (alternating with the "MENU
ITEM"), until the grill attains the set temperature
range for that menu, then the "MENU ITEM," (only),
will be displayed.
NOTE: If the display reads either "TOO COOL" or
“TOO HOT" the upper platen will not lower and
initiate a cooking sequence.
2. After laying product in the prescribed method, press
the GREEN ("CANCEL/RAISE") and the BLACK
("STANDBY") buttons at the same time. An audible
alert will sound and the platen will lower to the
preset gap and the timing will automatically start.
3. When the cook cycle times down to five, (5),
seconds remaining, a pre-time-out alarm will sound
to alert the grill operator.
4. When the cooking time has been completed, the
upper platen will raise and the display will flash
"REMOVE" with an audible alert, then remove
product per the prescribed method.
5. To cancel a cooking cycle, press the GREEN
("CANCEL/RAISE") button. The upper platen will
rise. The display will flash "CANCEL" with an
audible alert.
NOTE: If the alarm cancel is set to AUTO, the audible
alert will sound five (5) seconds before timing
is finished.
-OR-
If the alarm cancel is set to MANUAL, the
audible alert will sound as the timing is
finished.
To Cook in Flat Grill Mode:
1. SELECT a flat menu by pressing the "MENU
SELECT" button, until you attain the required menu
item. The display may read either "TOO COOL" or
"TOO HOT" (alternating with the "MENU ITEM")
until the grill attains the set temperature for that
menu.
2. After laying product in the prescribed method, press
the GREEN, ("CANCEL/RAISE"), and the BLACK,
("STANDBY"), buttons at the same time, starting
the cooking time countdown.
NOTE: If the display reads either "TOO COOL" or
“TOO HOT" the controller will not initiate a
cooking sequence.
3. PERFORM the required functions displayed, i.e.;
sear, turn, to cancel the audible alerts, press the
BLACK ("STANDBY") button.
CAUTION: Pressing the GREEN ("CANCEL/RAISE")
button will cancel the cooking cycle, and
pressing any other button on the controller
will cancel the alarm.
4. When the cooking time has been completed, the
display will flash "REMOVE" with an audible alert.
Remove product per the prescribed method.
NOTE: If a required flat grill menu cannot be found, go
to the programming mode (see programming,
“MENU ITEMS”.