background image

Document #MPOELSVC0504

Page 1

Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent using genuine 

Garland replacement parts. Garland will have no obligation with respect to any product that has been improperly installed, 

adjusted, operated or not maintained in accordance with national and local codes or installation instructions provided 

with the product, or any product that has its serial number defaced, obliterated or removed, or which has been modifi ed 

or repaired using unauthorized parts or by unauthorized service agents. For a list of authorized service agents, please refer 

to the Garland web site at http://www.garland-group.com. Th e information contained herein, (including design and parts 

specifi cations), may be superseded and is subject to change without notice.

Continuous product improvement is a Garland policy, therefore design and specifi cations are subject to change without notice.

GARLAND COMMERCIAL INDUSTRIES

185 East South Street

Freeland, Pennsylvania 18224

Phone: (570) 636-1000

Fax: (570) 636-3903

GARLAND COMMERCIAL RANGES, 
LTD.

1177 Kamato Road, Mississauga, Ontario L4W 1X4

CANADA

Phone: 905-624-0260

Fax: 905-624-5669

Enodis UK LTD.

Swallowfi eld Way, Hayes, Middlesex UB3 1DQ ENGLAND

Telephone: 081-561-0433

Fax: 081-848-0041

Document #MPOELSVC0504

© 2004 Garland Commercial Industries, Inc.

Service Manual

for

Model MPOE5L

Summary of Contents for moisture+ MPOE5





























Reviews: