Mealstream Ovens Pt. No. 32Z3403 Issue 15
Page 32
TDK
Mount
Door
Hinge
Door hinge adjustment
Spring clips
5. Fit door frame assembly (including seals
and cage nuts) firmly against cavity and
tighten all fixing bolts to secure (RHS)
and (LHS) Hinge assy.
6. Position door frame central by using the
following method.
Measure the distance between the side of the
door and the TDK Mounting Strip on both
sides with the door in the closed position.
Add these two measurements together and
divide by 2. Adjust hinge adjustment bolt so
the door is the distance calculated from the
TDK Mounting Strip and lock in position with
lock nut.
8. Fit door springs to door arms and to the hook
at base of inner side panels. Check operation
of door and remove (LHS) spring.
7. Fit (RHS) and (LHS) door arms through slots
in cavity and insert door arm pivot pins
through door arms into door frame.
Door arm pivot pin
PROCEDURE
FOR
BUILDING
AND
FITTING MEALSTREAM DOOR
