manualshive.com logo in svg

Garland INT40G2-44, User Manual

Share
Download
Garland INT40G2-44 User Manual Download Page 23

Packet Broker

EdgeLens Inline Security Packet Broker | INT40G2XR44 | 1.19.5

4.2 Load Balancing Policy

The load balancing policy determines the hashing applied to all load balancing groups, taps in the load

balance mode and the ATLB2 Chained mode. The load balancing policy options are as follows and may
be applied as L3 and/or L4 or L2.

Ipv4 Source

MAC Source

Ipv4 Destination

MAC Destination

L4 Source Port

L4 Destination Port

1. Select Load Balancing Policy on the Packet Broker Configurations panel.

The Load Balancing Policy panel will be displayed.

2. Select the desired load balancing policy options.

3. Select Save to save updates.

4. Select Cancel to disregard changes.

4.2.1 Load Balancing Group

Load balancing groups are used as an egress option on config maps. The traffic applied to the ports
assigned to a load balancing group will follow the hashing per the load balancing policy. Ports may be
added or removed from load balancing groups as desired. However, if ports are added or removed from a
load balancing group that is used in a config map, the config map load balancing group will be also
modified, the reverse is also applied. Previously created load balancing groups will appear on the Create
Config Map panel.

1. Select Load Balancing Groups on the Packet Broker Configurations panel.

The Load Balancing Groups panel will be displayed.

2. Select Create Group.

The Create New Load Balance Group panel will be displayed.

3. Enter the name. If no name is entered the system will automatically apply a name as follows,

lbg, lbg(2), lbg(3), etc.

4. Enter the description, optional.

5. Add ports by placing the cursor on the desired port. Select with the left mouse button. Drag the port to

the New L.B. Group panel and release. Repeat for all desired ports. Ports may be added in any
combination.

6. Remove a port by placing the cursor on the port in the New L.B. Group panel and double press the left

mouse button.

7. Select Save to save updates.

8. Select Cancel to return to the Load Balancing Groups panel.

The load balancing group will be displayed on the Load Balancing Groups panel. The assigned

ports will also be displayed.

Garland Technology  |  716.242.8500  | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.

22

Summary of Contents for INT40G2-44

































Reviews:

No comments

Brands by name

Popular brands

Load more brands