![background image](http://html2.mh-extra.com/html/garland/int10g8sr56-sp/int10g8sr56-sp_user-manual_5064157028.webp)
User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
8. Enter the Remote IP Address, (l2GRE Header SIP).
9. Enter the Key, (1-16777215).
The default l2GRE Header SMAC is automatically defined by the system. There are five
predefined SMACs.
10. Select Advanced to select an alternative DMAC or to manually enter the DMAC, (l2GRE Header
DMAC).
11. Select Advanced to add a VLAN ID, optional, (1-4095).
12. Select Set.
13. Select Cancel to disregard.
14. Select Save.
The gre-rx-only tunnel will be displayed on the Tunnels panel.
15. The tunnel may be deleted by selecting red X.
Filter Template
Filter templates may be created as a pass all, pass by or deny by. Pass by and deny by templates
may include multiple matching options to filter traffic. The options are considered by the system as (and)
options. Thus, for traffic to pass or be denied it must match all defined options. Once a template is
created it will appear on the Create Config Map panel and may be used to create an ingress or egress
filter. Template options may be modified when applied to a config map. Any option modification made will
not change the original template. It is advisable to rename a filter applied to a config map if the original
template options were modified.
1. Select Filter Templates.
The Filter Templates panel will be displayed.
2. Select Create Template.
The Create New Filter Template panel will be displayed.
3. Enter the template name. If no name is entered the system will automatically apply a name as follows,
tmplt, tmplt(2), tmplt(3), etc.
4. Enter the description, optional.
5. Select the Template Type, Pass All, Pass By or Deny By.
6. If pass by or deny by was selected in Step 5, the options will be displayed as follows.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
28