manualshive.com logo in svg

Garland INT10G8SR56-SP, User Manual

Share
Download
Garland INT10G8SR56-SP User Manual Download Page 26

User Guide

EdgeLens | INT10G8XX56-SP  |  4.29.2

The Configure panel will be displayed.

6. Select GRE TX Only.

7. Enter the Tunnel IP Address, (l2GRE Header SIP).

8. Enter the Remote IP Address, (l2GRE Header DIP).

9. Enter the Remote MAC Address, (l2GRE Header DMAC).

10. Enter the Key, (1-16777215).

The default l2GRE Header SMAC is automatically defined by the system. There are five
predefined SMACs.

11. Select Advanced to select an alternative SMAC or to manually enter the SMAC.

12. Select Advanced to add a VLAN ID, optional, (1-4095).

13. Select Set.

14. Select Cancel to disregard.

15. Select Save.

The gre-tx-only tunnel will be displayed on the Tunnels panel.

16. The tunnel may be deleted by selecting red X.

 Decapsulate l2GRE Packets (GRE-RX Only)

When a l2GRE packet is decapsulated the l2GRE header segments are removed from the
packet.

l2GRE Encapsulated Packet

l2GRE Decapsulated Packet

1. Select Tunnels.

The Tunnels panel will be displayed.

Garland Technology  |  716.242.8500  |  garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.

26

Summary of Contents for INT10G8SR56-SP










































Reviews:

No comments

Brands by name

Popular brands

Load more brands