USER GUIDE
EdgeLens | INT10G8xx56
Snmp -
Displays the current SNMP configuration.
Edit Configuration
- select to change the snmp configuration
Enable SNMP Config
- select to enable snmp
Access Port
- displays the current access port, default 161. If desired a new
port number may be entered
Trap Port
- displays the current trap port, default 162. If desired a new
port number may be entered
Trap IP Address
- displays the current snmp server. If desired a new snmp
server may be entered
Protocol
- displays the current protocol, default V2 Read/Write. If desired
the protocol may be changed to V2 Read Only or V3 by using
the pull down panel
V2 Community Password
- the default is gtpublic, but not visible. If desired a new
V2 community password may be entered
If the protocol was changed to V3 the following options will appear. The unit supports
snmp V3 MD5 and DES.
V3 User
- enter the snmp V3 username, 8-20 characters
V3 Auth Pass
- enter the snmp V3 authentication password, 8-20 characters
V3 Priv Pass
- enter the snmp V3 privacy password, 8-20 characters
Save
- select to save any changes
Cancel
- select to return to snmp configuration
Export Configuration -
Provides the ability to download the unit’s configuration. The date/time and network settings are
excluded. The download path is determined by the browser.
Export Configuration
- select to to download the current configuration.
GREEN Export
- select to start download
Import Configuration -
Provides the ability to upload a new configuration file to the unit. This will overwrite the unit’s current
configuration excluding the date/time and network settings.
Import Configuration
- select to upload a configuration file to the unit
Choose File
- select to choose the configuration file
Upload
- select to upload the configuration file
Restart Import
- select to choose a different configuration file or cancel
Configure
- select to load the configuration file on the unit
Garland Technology | 716.242.8500 |
Copyright © 2020 Garland Technology, LLC. All rights reserved.
7
