INSTALL GUIDE
AggregatorTAP | INT1G10CSASP
|
1.1.37
Selecting 2 brings up the Change/View Configuration page. Pressing 1 will bring up the configuration
screen that enables you to change the port to match your network. Pressing 2 and 3 enables you to select
which ports forwards a copy of the received packets to port 9 or port 10.
Note:
The INT1G10CSASP ships configured in Span mode. The user may change this by disabling Span
on each Network Pair.
To change a Network Ports select 1 under the Setup Network (Tap) Ports. Select the Network Pair to be
changed.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
5