INSTALL GUIDE
AggregatorTAP | INT1G10CSASP
|
1.1.37
This document describes the front panel, LED indications, interface and the installation procedure for the
INT1G10CSASP. This Aggregator TAP is ideal for 10/100/1000MB copper network monitoring. The
innovative design allows these TAPs to be easily installed into any copper 10/100/1000MB network
segment.
Front Panel
LED Indications
Port 1 LFP
Orange indicates LFP on Off indicates LFP off
Port 1 LNK
Link LED
Port 2 LFP
Orange indicates LFP on Off indicates LFP off
Port 2 LNK
Link LED
Port 3 LFP
Orange indicates LFP on Off indicates LFP off
Port 3 LNK
Link LED
Port 4 LFP
Orange indicates LFP on Off indicates LFP off
Port 4 LNK
Link LED
Port 5 LFP
Orange indicates LFP on Off indicates LFP off
Port 5 LNK
Link LED
Port 6 LFP
Orange indicates LFP on Off indicates LFP off
Port 6 LNK
Link LED
Port 7 LFP
Orange indicates LFP on Off indicates LFP off
Port 7 LNK
Link LED
Port 8 LFP
Orange indicates LFP on Off indicates LFP off
Port 8 LNK
Link LED
Port 9 LNK
Link/Activity LED
Port 9 Activity
Solid Green indicates no Activity Flashing Green indicates activity
Port 10 LNK
Link/Activity LED
Port 10 Activity
Solid Green indicates no Activity Flashing Green indicates activity
PS1
Power Supply 1 LED (Green indicates normal / Off indicates power not applied)
PS2
Power Supply 2 LED (Green indicates normal / Off indicates power not applied)
Interfaces
Serial
Serial Interface used to configure the INT1G10CSASP
(see
Settings for the Console Port)
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
1
