English
34/96
Depending on the symptoms of the machine we can detect the likely cause and solve the problem.
In any other case, take the machine to your nearest after sales service.
Problem
The engine stops when started.
Machine not connected to mains.
Cable extension faulty.
Internal cabling faulty.
Switch faulty.
Excessive distance between blade A and
plate B.
Blunt blade.
Hopper, ejection mouthpiece or blades
blocked.
Blade blocked by strange element.
BladeA and plate B in contact.
Strange and hard elements blocking the
blades.
Problem in the cutting system blades.
Machine works sporadically.
Performance of the machine is
inadequate.
Blade does not turn.
Excessive vibrations or noise.
Plug or connector in a bad state.
Switch damaged.
Security switch activated.
Cable damaged.
Connect to mains.
Check the cable extension and substitute
if necessary. Stop the machine,
disconnect the machine and check the
hopper and blades.
Adjust the cutting mechanism.
Substitute blades.
Stop the machine, unplug and clean the
shredding conduct and the blades.
Stop the machine, unplug and
unblock the blades.
Adjust the cutting mechanism.
Clean entry conduct and blades.
Take your machine to service agent.
Try another plug. If the machine does not
start, take to nearest service agent.
Take the machine to after sales service.
Press the restart button.
Take the machine to after sales service.
Never repair cable using tape.
Cause
Action
9. TROUBLESHOOTING
Summary of Contents for 250 E
Page 92: ...Portugu s 92 96 92 28 NOTAS...
Page 93: ...Portugu s 93 96 NOTAS...
Page 94: ...Portugu s 94 96 NOTAS...
Page 96: ......