Garland 1280 QG, Instruction Manual, Page: 34 / 160

English
34/160
English
35/160
5.2. DETAILED DESCRIPTION OF THE PRODUCT
1. Exit chute
2. Rotor axle
3. Rotor box
4. Entry chute
5. Transport handle
6. Emergency button
7. Muffler
8. Air filter cover
9. Accelerator
10. Petrol deposit stopper
11. Oil deposit stopper
12 . On/off switch
13. Starter handle
14. Petrol cutting key
15. Air lever
16. Tension pulley of the belt
5. MACHINE DESCRIPTION
5.1. CONDITIONS OF USE
The chipper is only designed to shred pieces of wood with a maximum diameter of 8 cm. It is prohibited
to shred any other material (for example metal, stones, plastics and any other material). If you want to shred
roots, remove the sand, mud or other residues before shredding. Any other use of the shredder not described
here, annuls the warranty responsibility of the manufacturer. Do not use this machine for any other purpose not
intended. The use of this machine for other than the designated operations may result in dangerous situations.
Utilice esta máquina en el exterior, en ambientes secos y temperaturas entre 5ºC y 45ºC.
Remember that the machine operator is responsible for the dangers and accidents caused to other people or
things. The manufacturer shall not be in any case responsible for damages caused by improper or incorrect use
of this machine.
Images and drawings in this manual are approximate and may not correspond with the actual product.
5
8 7
1
2
3
4
9
14
6
15
12
11
16
13
10