GARIA VIA, User Manual, Page: 27 / 119

14
02
SAFETY
2.4.3 Driver qualifications
The driver of the vehicle should as a minimum have read this complete user’s manual,
have full knowledge and understanding of the use of this vehicle and be in possession
of a valid driver’s license for motor vehicles.
The driver is required to drive responsibly and safely, in order to avoid damage to
property and/or injuries to others or him-/herself.
The driver must know about the rules and regulations for driving leisure vehicles of
the area where the vehicle is operated, and must follow these at all times. No persons
under the age of 16 shall be allowed to operate the vehicle.
In areas with pedestrians and other traffic, the driver must exercise caution, drive
slowly and pay attention to the surroundings.
For the Gaira Via and Monaco it is a legal requirement that all drivers of these vehi-
cles have a valid driver license. If the Garia LSA and Garia Monaco is fitted with seat
belts it is required that these are fastened when the car is in motion.
2.4.4 Safety precautions when maintaining the vehicle
When maintaining the vehicle, make sure to follow all safety precautions located on
the vehicle, described in this user’s manual, in the Garia Workshop Repair Manual and
especially the following:
• Ensure that the vehicle has been properly secured and cannot move, when vehicle
is being maintained.
• Ensure that the vehicle has the correct lifting support before any repair and
maintenance is carried out.
• Avoid fire hazards and ensure that there is proper fire extinguishing equipment
within reach.
• The electrical system must be disconnected before ANY work is carried out on
this vehicle. (See chapter 4 for instructions on disconnecting power)
• Make sure that warning and information labels are in a readable condition. If any
label needs replacing to make the vehicle conform to the correct safety stand-
ards, please consult a qualified repair shop. It is recommended that maintenance
is provided by an Authorized Garia Service Dealer.
• Always use correct insulated tools when working on and around electrical instal-
lations, such as batteries, on the vehicle.