5. Depress the spring clip in the lower stem to adjust to the
most comfortable operating length.
6. Wrap the searchcoil snugly about the stem with the first
turn of the cable over the stem.
7. Insert the cable connector into the connector of control
housing and hand-tighten.
8. The location of the arm cuff may be adjusted by removing
the screw on the bottom and moving it to the other hole.
6 Garrett Metal Detectors
ACE 150
◆
ACE 250 7
ACE
ASSEMBLY
1. Align the holes in the mounting washers with the small
posts on the stem and press firmly into the lower stem.
1.
2.
2. Slide the searchcoil onto the stem.
3. Insert the threaded bolt through the holes of the lower stem
and searchcoil. Hand-tighten the searchcoil assembly with
the remaining wing nut.
4. Depress the spring clip and insert the control housing into
the upper stem.
3.
4.
5.
6.
7.
8.
Summary of Contents for ACE 150
Page 18: ...32 Garrett Metal Detectors ...
