Gared Hoopmaster LT, Installation, Operation And Maintenance Instructions, Page: 8 / 16

Hoopmaster LT Portable Backstop
-7-
2. Attach the backboard brace yokes to the brackets on top half of board, using M10 x 40
hex head bolts with flat washers, lock washers, and nuts. Secure braces to bracket on
main arm with M10 x 50 hex bolt, lock washer and nuts. Place bottom support bracket
on and tighten in place with (2) M10 x 160 hex head bolts with washers, nuts and lock
washers. See Figure 3
Figure 3
3) Remove the shipping bracket from the main boom and
store the bracket, threaded rods, and hardware in a
location for future use when replacing backboards or
storing the unit.