Hoopmaster LT Portable Backstop
Operation
1.
Before operating the unit, read all caution, warning, and information labels.
2.
To raise the unit from the stored position.
a.
Make sure the unit is in the correct position on the court.
b.
Remove the safety pin from the slide bar. Loosen the locking knob.
c.
Step on the setting pad levers to engage the latches.
d.
Using the handle on the top of the rear upright, lift the upright and rotate
to the full up position.
e.
Install the safety pin into the slide tube locking bar.
3.
To lower the unit from the playing position.
a.
Remove the safety pin from the slide tube locking bar.
b.
Using the handle on the top of the rear upright, pull the upright back and
rotate it to the full down position.
c.
The arm should be lowered until the down latch engages the main portion
of the upright arm.
d.
Install the safety pin into the slide tube locking bar. Tighten the locking
knob.
4.
If the unit is to be moved to storage, make sure the shipping bracket and threaded
rod are reinstalled on the unit to prevent accidental raising of the boom. Raise the
setting pads until the unit is fully on all four casters.
5.
Roll the unit to the storage facility.
- 10 -
