![background image](http://html.mh-extra.com/html/gardner-denver/wittig-rfw-150-dv/wittig-rfw-150-dv_operating-and-service-manual_563944020.webp)
BA-
45.01.0 • US •01/15
4-9
4. Installation
Mounting of V belt disks with taper-lock clamping
bushes
1. Clean and de-grease the bare surfaces. Place
the disk and the bush inside each other. Align
the holes and insert the screws loosely.
2. Push the disk with the bush onto the shaft,
align it and tighten the screws evenly and
tightly.
Dismantling
3. Take out the screws, then screw one of them
as a leverage screw into the hole with a half
thread in the bush, and tighten it. This
releases the taper-lock bush.
4. Remove the loose pulley unit by hand, without
knocking it or damaging the machine.