Gardner Denver Welch LVS 105 T 10 ef+, Operation Manual, Page: 59 / 64

Maintenance
Operation Manual LVS 105 T
– 10 ef
+ 59
8.2.4 Closing the device
Close the device in the reverse order of opening it; see section 8.2.1 Opening the device .
CABLE ROUTING
►
When closing the device, watch out for the cable routing. Cables must
not become pinched or damaged when closing the device.
►
Devices with damaged cables are not permitted to be started up.
8.3 Repairs by the manufacturer
SERVICE / REPAIR
►
The repair is only performed if there is a completely filled-out damage
report; see section 8.4 Damage report.
►
The specification of the contamination or the complete cleaning is a le-
gal component of the contract.
Transfer a faulty device to the manufacturer, see section 9.2 Ordering and service contact.
8.4 Damage report
The damage report form is available for download on our website www.gardnerden-
ver.com/de-de/welch in the "Service" menu

"Damage reports".
If you do not have access to the Internet, you can request the form from us,
tel.: +49 3677 604 0.
WARNING
►
Incompletely or incorrectly filled-out damage reports can endanger the
service personnel!
►
Make complete statements in the damage report, especially with regard
to a possible contamination of the components in contact with media.
8.5 Disposal
NOTE
►
Incorrect disposal can cause environmental damage.
►
The device must be disposed of in accordance with legal regulations
as per Directive 2012/19/EU.
►
Contaminated devices must be decontaminated according to the legal
regulations.