Set-up and connection
Operation Manual LVS 105 T
– 10 ef
+
31
6. Connect the data connection for communication with the device (see section
For communication with the device via LAN (RJ45), connect a connection cable with
at least CAT-6.
For the serial connection (RS 232), a standardized cable can be used.
7. Connect the device with the power grid (see section
8. Check that the connections are all properly seated.
ATTENTION
►
Switch the device off before connecting or disconnecting the commu-
nication interfaces.
5.4 Electrical connection
The electrical connection is established using a standardized, insulated device connection
cable as per IEC 60320-C13 (see section
The power connection, power switch and device fuse are located on the back of the device
(see section
5.5 Storage
The device must be stored in a dust-free interior space. The storage conditions must be ad-
hered to (see section
ATTENTION
►
For storage, all connections must be sealed with the appropriate in-
cluded protective caps.
►
Another equivalent protective cap can also be used for storage.