Gardner Denver RFL 102, Owner'S Manual

Page: 6 / 36

RFL-7-500 Page 5
All personnel who are required to work with the machine must read the operating instructions, especially the safety
instructions, before commencing such work.
•
Work on the machine must only carried out when the machine is at a standstill.
•
Before such work begins, measures must be taken to prevent the drive from being switched on.
•
During such work, the machine must not be subjected to pressure or vacuum.
•
On the vehicle side:
•
Close the shut-off valve
•
Bleed or vent the pressure pipe between the machine and the shut-off valve.
•
Release pressure manually at the safety valve, or vent the machine at the ventilation valve.
•
Pay attention to the manometer!
•
The drive prevention device must only be removed when the machine is at a standstill.
•
The contact prevention guards must only be removed when the machine and the pressure pipe are cool.
•
Before switching on the machine, ensure that all safety devices are correctly in place.
For the sake of environmental protection, all liquids which come from the machine during maintenance work, e.g.
lubricating oil, must be collected and disposed of in a way that does not harm the environment.
ATTENTION
“MAX SURFACE TEMPERATURE 150°C!”